Wasp-barcode WDI4600 2D Product Reference Guide Uživatelský manuál stáhnout pdf (Strana 223)

RS-232 Parameters

Product Reference Guide

213

Enable Character

Specifies the value of the RS-232 host command used to enable the reader.

ASCII characters or any hex value from 0 to

0xFF can be selected.

Setting to previously defined characters such as XON, XOFF, or host com-

mands conflicts with normal operation of these characters. 8-bit data is

not reco

gnized when the option

Data Bits

has been set as 7 Data Bits.

To set this feature:

Determine the desired character or value. A setting of 0xFF indicates the Enable Character is

not used (not available).

Determine the desired character or v

alue.

2. Use the ASCII Chart on the inside back cover of this manual to find the hex equivalent

for the desired character/value.

3. Go to page 30 and scan the ENTER/EXIT PROGRAMMING MODE barcode to enter

Programming Mode.

4. Scan the barcode: SELECT ENABLE CHARACTER SETTING.

5. Scan the appropriate two alphanumeric

characters

from the keypad in Appendix D, Key-

pad, that represent the desired character/value in step 2 above. The second character will

cause a two-beep indication.

6. Scan the ENTER/EXIT PROGRAMMING MODE barcode to exit Programming

Mod

This completes the procedure. See Table 31 for some examples of how to set this feature.

Table 31. Enable Character Setting Examples

STEP ACTION EXAMPLES

1 Desired character/value

‘e’ ‘}’ ‘E’

Enable Command

Not Used

Hex equivalent from

ASCII

Chart

0x65 0x7D 0x45 0xFF

3 Scan ENTER/EXIT PROGRAMMING MODE

4 Scan SELECT ENABLE CHARACTER VALUE SETTING

Scan Two Characters From

Appendix D, Keypad

‘6’ and ‘5’ ‘7’ and ‘D’ ‘4’ and ‘5’ ‘F’ AND ‘F’

6 Scan ENTER/EXIT PROGRAMMING MODE

1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 283 284

Komentáře k této Příručce

Žádné komentáře

Wasp-barcode WDI4600 2D Product Reference Guide Uživatelský manuál Strana 223

Komentáře k této Příručce

Související produkty a manuály pro Skenery Wasp-barcode WDI4600 2D Product Reference Guide